The WD102 is a microchip-based device that uses gold-plated sensing probes to detect the presence of water or other conductive liquid. The WD102 is powered by an AC or DC source, 14-30 volts. It features normally open and normally closed (form C) relay contacts rated at 5A @ 120 VAC/30 VDC for connection to a monitoring system, or direct control of another device. The mounting legs will allow a sensing height adjustment from 0″ to 1/2″. The WD102 is designed to signal an alarm if one or more of three conditions are met: water is detected, power is lost to the unit, or if there is an internal failure. It comes with a 5 ft. remote probe. The WD-100-5,10, -25, -50, -100 comes with the specified length of conductivity cable.